sil resistor network l series thick film low profle sip conformal coated resistor networks rohs compliant electrical environmental standard resistance range, ohms 1%: 22r - 1m; 2%:10r - 5m6; 5%: 10r - 10m standard resistance tolerance, at 25c 2% optonal: 1% (f tol.), 5% (j tol.) operatng temperature range -55c to +125c temperature coefcient of resistance 100ppm/c (<50 ohms = 250ppm/c) temperature coefcient of resistance, tracking 50ppm/c maximum operatng voltage 100vdc or pr insulaton resistance 10,000 megohms thermal shock plus power conditoning r 0.70% short time overload r 0.25% terminal strength r 0.25% moisture resistance r 0.50% mechanical shock r 0.25% vibraton r 0.25% low temperature storage r 0.25% high temperature exposure r 0.50% load life, 1,000 hours r 1.00% resistance to solder heat (per mil-std-202, method 210, cond.b) r 0.25% dielectric withstand voltage 200v for 1 minute marking permanency mil-std 202, method 215 lead solderability mil-std 202, method 208 flammability ul-94v-o rated storage temperature range -55c to +150c specifcatons subject to change without notce. ma ke p ossibl e resistors all parts are pb-free and comply with eu directve 2011/65/eu (rohs2) 07.14 general note tt electronics reserves the right to make changes in product specifcation without notice or liability. all information is subject to tt electronics own data and is considered accurate at time of going to print. ? tt electronics plc www.ttelectronicsresistors.com
sil resistor network l series mechanical standard resistance values, ohms power deratng curve -3 circuit (isolated resistors) & -1 circuits (bussed resistors) ohms code ohms code ohms code 22 220 820 821 33k 333 27 270 1k 102 39k 393 33 330 1.2k 122 47k 473 39 390 1.5k 152 51k 513 47 470 1.8k 182 56k 563 51 510 2k 202 68k 683 56 560 2.2k 222 82k 823 68 680 2.7k 272 100k 104 82 820 3.3k 332 120k 124 100 101 3.9k 392 150k 154 120 121 4.7k 472 180k 184 150 151 5.1k 512 200k 204 180 181 5.6k 562 220k 224 200 201 6.8k 682 270k 274 220 221 8.2k 822 330k 334 270 271 10k 103 390k 394 330 331 12k 123 470k 474 390 391 15k 153 510k 514 470 471 18k 183 560k 564 510 511 20k 203 680k 684 560 561 22k 223 820k 824 680 681 27k 273 1meg 105 -5 circuit (dual terminators) power dissipaton, wats at 70c ohms code ohms code ohms code resistor (per circuit) r1/r2 r1/r2 r1/r2 r1/r2 r1/r2 r1/r2 model package -1 -3 -5 180/390 181/391 330/390 331/391 3k/6.2k 302/622 l06 .6 .125 .200 .125 220/270 221/271 330/470 331/471 - - l08 .8 .125 .200 .125 220/330 221/331 330/680 331/681 - - l10 1.0 .125 .200 .125 lead finish snagcu substrate material alumina resistor material cermet body material conformal epoxy resin percent of rated power 100 80 60 40 20 0 150 125 70 -0 degrees c ma ke p ossibl e 07.14 general note tt electronics reserves the right to make changes in product specifcation without notice or liability. all information is subject to tt electronics own data and is considered accurate at time of going to print. ? tt electronics plc www.ttelectronicsresistors.com
outline dimensions (inch/mm) schematcs no. of lead s .100 .005 2.54 0.13 pitch. non- accumulative .020 .004 0.51 0.10 .012 .003 0.31 0.08 centered on packag e .140 .020 3.56 0.51 max. ?l? max. max. 12 34 n -3 circuit isolated resistor s -5 circuit dual terminator 12 34 r1 r2 n 12 34 n -1 circuit bussed resistor s # of leads 4 5 6 7 8 9 10 11 12 13 14 dim. l max. .40 10.16 .50 12.70 .60 15.24 .70 17.78 .80 20.32 .90 22.86 1.00 25.40 1.10 27.94 1.20 30.48 1.30 33.02 1.40 35.56 .200 .098 5.08 2.5 sil resistor network l series ma ke p ossibl e 07.14 general note tt electronics reserves the right to make changes in product specifcation without notice or liability. all information is subject to tt electronics own data and is considered accurate at time of going to print. ? tt electronics plc www.ttelectronicsresistors.com
typical part marking packaging l logo lead #1 indicato r mode l series resistance code date code numbe r of lead s circuit type 8 3 s 103 logo 4 leads onl y lead #1 indicato r resistance code date code circuit type & i.d. code b 104 standard: bulk: quantty = 4 -10 pins: 200 per bag, 1000 per box 11 -14 pins: 100 per bag, 500 per box opton: tape in ammo box (4 - 10 pins only). all units oriented with lead #1 to the lef of directon of feed. tape: width = 18mm pitch = 12.7mm ammo box: capacity = 1,000 units per box. 12,000 units per carton sil resistor network l series ma ke p ossibl e 07.14 general note tt electronics reserves the right to make changes in product specifcation without notice or liability. all information is subject to tt electronics own data and is considered accurate at time of going to print. ? tt electronics plc www.ttelectronicsresistors.com
ordering informaton applicable documents mil-r-83401 resistor networks, fixed, film, general specifcatons mil-std-105 sampling procedures and tables for inspecton by atributes mil-std-202 test methods for electronic and electrical component parts l 08 5 s 331 / 471 f lf xx model series number of leads: 4 thru 14 circuit type: 3 = isolated 1 = bussed 5 = dual terminator m1 or m2 = tube ** (no code used for standard bulk packaging.) lf: rohs complian t tolerance code: f = 1% j = 5% (no code used for 2% standard.) r2 resistance code: (add for -5 circuit only) resistance code : first 2 digits are significant. last digit denotes number of trailing zeros. for "f" tolerance first 3 digits are significant. fourth digit denotes number of trailing zeros. * refer to packaging for automation section (page a-3) for ammo pack capacity and dimensions. ** refer to packaging for automation section (page a-4) for m1 and m2 tube capacity and dimensions. 3t = ammo pack, 3 leads only atached to tape.* sil resistor network l series ma ke p ossibl e 07.14 general note tt electronics reserves the right to make changes in product specifcation without notice or liability. all information is subject to tt electronics own data and is considered accurate at time of going to print. ? tt electronics plc www.ttelectronicsresistors.com
|
